[Date Index][Thread Index]
[Date Prev][Date Next][Thread Prev][Thread Next]
RE: WML under Windows...
- From: "Darryl Smith" <nospam@thanx>
- Date: Sat, 8 Jun 2002 18:02:42 +1000
Further to this... I just downloaded CYGWIN (www.CYGWIN.COM) that sort
of allows what I want. I am compiling up the WML and I get
eperl_main.c: my_perl = perl_alloc();
eperl_main.c: perl_construct(my_perl);
eperl_main.c: rc = perl_parse(my_perl, Perl5_XSInit, myargc, myargv,
env);
eperl_main.c: rc = perl_parse(my_perl, NULL, myargc, myargv, env);
eperl_main.c: rc = perl_run(my_perl);
eperl_main.c: if (my_perl) {
eperl_main.c: perl_destruct(my_perl);
eperl_main.c: perl_free(my_perl);
Binary file eperl_main.o matches
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ grep Perl5_SetScalar *
eperl_perl5.c:void Perl5_SetScalar(char *pname, char *vname, char
*vvalue)
eperl_perl5.c: Perl5_SetScalar("main", ca, cp);
eperl_proto.h:extern void Perl5_SetScalar(char *pname, char *vname, char
*vvalue
);
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ joe
bash: joe: command not found
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ less eperl_perl5.c
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ grep my_perl *
eperl_main.c: static PerlInterpreter *my_perl = NULL;
eperl_main.c: my_perl = perl_alloc();
eperl_main.c: perl_construct(my_perl);
eperl_main.c: rc = perl_parse(my_perl, Perl5_XSInit, myargc, myargv,
env);
eperl_main.c: rc = perl_parse(my_perl, NULL, myargc, myargv, env);
eperl_main.c: rc = perl_run(my_perl);
eperl_main.c: if (my_perl) {
eperl_main.c: perl_destruct(my_perl);
eperl_main.c: perl_free(my_perl);
Binary file eperl_main.o matches
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ make
gcc -g -O2 -O2 -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing
-I/usr/local/include
-I/usr/lib/perl5/5.6.1/cygwin-multi/CORE -I. -c eperl_perl5.c
eperl_perl5.c: In function `Perl5_XSInit':
eperl_perl5.c:58: `my_perl' undeclared (first use in this function)
eperl_perl5.c:58: (Each undeclared identifier is reported only once
eperl_perl5.c:58: for each function it appears in.)
eperl_perl5.c:58: warning: passing arg 3 of `Perl_newXS' from
incompatible point
er type
eperl_perl5.c: In function `Perl5_ForceUnbufferedStdout':
eperl_perl5.c:73: `my_perl' undeclared (first use in this function)
eperl_perl5.c: In function `Perl5_SetScalar':
eperl_perl5.c:104: `my_perl' undeclared (first use in this function)
make: *** [eperl_perl5.o] Error 1
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ grep my_perl *
eperl_main.c: static PerlInterpreter *my_perl = NULL;
eperl_main.c: my_perl = perl_alloc();
eperl_main.c: perl_construct(my_perl);
eperl_main.c: rc = perl_parse(my_perl, Perl5_XSInit, myargc, myargv,
env);
eperl_main.c: rc = perl_parse(my_perl, NULL, myargc, myargv, env);
eperl_main.c: rc = perl_run(my_perl);
eperl_main.c: if (my_perl) {
eperl_main.c: perl_destruct(my_perl);
eperl_main.c: perl_free(my_perl);
Binary file eperl_main.o matches
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$ make
gcc -g -O2 -O2 -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing
-I/usr/local/include
-I/usr/lib/perl5/5.6.1/cygwin-multi/CORE -I. -c eperl_perl5.c
eperl_perl5.c: In function `Perl5_XSInit':
eperl_perl5.c:58: `my_perl' undeclared (first use in this function)
eperl_perl5.c:58: (Each undeclared identifier is reported only once
eperl_perl5.c:58: for each function it appears in.)
eperl_perl5.c:58: warning: passing arg 3 of `Perl_newXS' from
incompatible point
er type
eperl_perl5.c: In function `Perl5_ForceUnbufferedStdout':
eperl_perl5.c:73: `my_perl' undeclared (first use in this function)
eperl_perl5.c: In function `Perl5_SetScalar':
eperl_perl5.c:104: `my_perl' undeclared (first use in this function)
make: *** [eperl_perl5.o] Error 1
Darryl@DELL8000 ~/wml-2.0.8/wml_backend/p3_eperl
$
My_perl is there in eperl_main.c, but not there... Can anyone help? This
is looking as if it might work, if I can get this fully compiled
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
-----Original Message-----
From: owner-sw-wml@engelschall.com [mailto:owner-sw-wml@engelschall.com]
On Behalf Of Darryl Smith
Sent: Saturday, 8 June 2002 4:55 PM
To: sw-wml@engelschall.com
Subject: WML under Windows...
G'Day
I was wondering how far people had got getting WML to work under
Windows. I would love it as it would allow me to do web development on
my laptop with all my favourite tools (running under windows)
Many thanks
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 International]
Darryl@radio-active.net.au | www.radio-active.net.au
______________________________________________________________________
Website META Language (WML) www.engelschall.com/sw/wml/
Official Support Mailing List sw-wml@engelschall.com
Automated List Manager majordomo@engelschall.com
______________________________________________________________________
Website META Language (WML) www.engelschall.com/sw/wml/
Official Support Mailing List sw-wml@engelschall.com
Automated List Manager majordomo@engelschall.com